[. . . ] For further information and specifications of the "Triton" series, please visit GIGABYTE website. (http://www. gigabyte. com. tw) The Following are not covered by the warranty: 1. [. . . ] Using the product incorrectly or in a manner other than the designed purpose. Consequential damage to other objects due to the product's fault. The devices inside, including power supply, hard disk, CD-ROM drive, motherboard, ventilator, etc, are not detached from the casing prior to transportation of the computer system, resulting in damage to the casing or other computer-related devices. Any loss/damage caused by failure to follow the installation process with in the user manual. Failure to wear gloves during installation of computer products may cause bodily harm or damage to your devices. Incorrect connector installation may possibly burn out the motherboard and other components. For detailed instructions, please refer to the motherboard user manual supplied by the motherboard manufacturer. 4-5 Connection of Fan Power Cables This chassis has one 12cm silent cooling fan in the front and one in the rear. This case includes internal connectors that connects the front and rear fans making it into a single 3-pin connector. Plug the 3-pin connector into the corresponding system fan socket on the motherboard. Required Tools: None 4-5. 1 11 English 4-6 Installation of 5. 25" Front Device Bay Required Tools: None This chassis can accommodate up to 5 x 5. 25" front devices. 4-6. 1 Detach the front panel (see step 1-3. 2 on page 6) and remove the mesh drive rail from the front panel. 4-6. 2 Remove the front EMI plate and attach the front panel onto the chassis. 4-6. 3 Slide the 5. 25" device into the drive bay from the front of the chassis. 4-6. 4 Secure the 5. 25" device with the internal latch. Refer to the figure for installation procedure. Lock 4-7 Installation of 3. 5" Front Device Bay Required Tools: None This chassis can accommodate up to 2 x 3. 5" front devices. Installation of 3. 5" front devices is the same as 5. 25" front devices, please refer to step 4-6. 4-7. 1 1 English 4-8 Installation of 3. 5" Internal Device Bay This chassis provides internal device bays to accommodate up to 3 hard disc drives. [. . . ] Installation of 3. 5" front devices is the same as 5. 25" front devices, please refer to step 4-6. 4-7. 1 1 English 4-8 Installation of 3. 5" Internal Device Bay This chassis provides internal device bays to accommodate up to 3 hard disc drives. The internal device requires securing runners, which can be found be found in the accessory box. Required Tools: Securing runners (2 per hard disc drive) 4-8. 1 Fit the securing runners on both sides of the HDD and slide the HDD into the internal device bay. Additional HDD can be installed in the 3. 5" front device bay. [. . . ]